Skip to main content
grasp.study
About
Explore
Pricing
Log in
Try it for free
Back to course
👋
Welcome to a Grasp lesson
Create a free account
to keep studying and create your own study path.
Embedded Firmware Engineer Learning Path
·
Module 1
STM32 Foundations and Bare-Metal C
1
STM32CubeIDE Setup for STM32F103C8T6
Set up the STM32CubeIDE toolchain and ST-Link for an STM32F103C8T6 project.
2
Cortex-M3 Architecture & STM32F103 Memory Map
Describe the ARM Cortex-M3 architecture and the STM32F103 memory map.
3
Direct Register Manipulation in Embedded Systems
Apply 'volatile', fixed-width integers, and bitwise operators for direct register manipulation.
4
Direct GPIO LED Blinking
Write a bare-metal program to blink an LED by manipulating GPIO registers directly.
5
Flashing Firmware with ST-Link
Compile firmware and flash it to the target using ST-Link.
6
Debugging Embedded Systems
Debug embedded code using breakpoints, register monitoring, and variable inspection.
7
Navigating STM32 Reference Manuals & Datasheets
Use the STM32 reference manual and datasheets to find peripheral register information.
Previous module
Next module
System Core: Clocks, Timers, and Interrupts