Skip to main content
grasp.study
About
Explore
Pricing
Log in
Try it for free
Back to course
👋
Welcome to a Grasp lesson
Create a free account
to keep studying and create your own study path.
Embedded Firmware Engineer Learning Path
·
Module 5
Synchronous Protocols: SPI and I2C
1
Synchronous vs. Asynchronous Communication
Explain the differences between synchronous (SPI, I2C) and asynchronous (UART) communication.
2
SPI Master Configuration for Multiple Slaves
Configure the SPI peripheral in master mode and manage chip select (CS) for multiple slaves.
3
SPI: Blocking Transmit & Receive
Implement blocking functions to transmit and receive data with an SPI peripheral.
4
I2C Master Mode Configuration
Configure the I2C peripheral in master mode.
5
I2C Master Read/Write Operations
Implement I2C master write and read transactions, handling start/stop conditions and ACKs.
6
I2C LCD Interfacing for Displaying Text and Sensor Data
Interface with an I2C LCD to display text and sensor data.
Debugging SPI and I2C with a Logic Analyzer
Use a logic analyzer to capture and decode SPI and I2C bus traffic for debugging.
Previous module
Serial Communication with UART
Next module
Data Acquisition and DMA