Skip to main content
grasp.study
About
Explore
Pricing
Log in
Try it for free
Back to course
👋
Welcome to a Grasp lesson
Create a free account
to keep studying and create your own study path.
C++ for ESP32
·
Module 3
ESP32 GPIO and Basic Peripherals
1
ESP32 GPIO Configuration
Configure GPIO pins for input and output modes using the ESP32 GPIO API
2
Digital I/O Basics
Read digital inputs and write digital outputs
3
GPIO Pull-up/Pull-down Resistor Configuration
Configure and use internal pull-up and pull-down resistors on GPIO pins
4
GPIO Interrupts: Responding to Pin Changes
Implement GPIO interrupts to respond to pin state changes
5
LEDC Peripheral: PWM Configuration and Generation
Configure and generate PWM signals using the LEDC (LED Control) peripheral
6
Reading Analog Sensors with ESP32 ADC
Read analog values from sensors using the ESP32 ADC peripheral
7
ESP32 DAC: Analog Voltage Output
Output analog voltages using the ESP32 DAC peripheral
Previous module
ESP32 Platform and Development Environment
Next module
Timers and Interrupts