Skip to main content

Welcome to a Grasp lesson

Create a free account to keep studying and create your own study path.

Lesson 6

Chemical Synaptic Transmission: From Action Potential to Postsynaptic Response

Recommended resources

Hello. Last lesson, you followed an action potential along an axon: a voltage change at one patch of membrane helps trigger a new spike at the next. Now the spike has reached an axon terminal. The question changes: how does activity in one cell produce a response in another when their membranes are separated by a gap?

In this lesson, you’ll trace the complete handoff at a chemical synapse: electrical activity in the sending neuron, release and movement of a chemical messenger, and a response in the receiving cell. Allow about 35–40 minutes for the video, readings, diagram, and a short sketch.


At the terminal: voltage opens a route for calcium

The presynaptic neuron is the sender; the postsynaptic cell is the receiver. Between them lies the synaptic cleft, a narrow extracellular gap. The action potential reaches the presynaptic axon terminal, but it does not jump across that gap. Instead, its change in voltage opens voltage-gated calcium channels in the terminal membrane.

Calcium ions, written , are much more concentrated outside the terminal than inside it. When those channels open, calcium enters the presynaptic terminal. This is a different ion movement from the sodium entry that drove the spike’s rising phase. Here, calcium entry is the crucial trigger for releasing a messenger.

Watch the animation for the physical layout and the release event. Skip its intervening catalogue of neurotransmitters; you do not need it to follow the mechanism.

Neuroscience basics: Synaptic transmission - Chemical synapse, Animation

“Neuroscience basics: Synaptic transmission” from Alila Medical Media shows the handoff at a chemical synapse. Watch for the location of the gap and for what calcium does after it enters the terminal.

Watch the overview for the sender, receiver, and synaptic cleft. Then watch calcium and release, focusing on the vesicle membrane merging with the terminal membrane.

Inside the terminal, synaptic vesicles are small membrane-bound compartments containing neurotransmitter molecules. Calcium entry activates proteins involved in vesicle fusion. A vesicle’s membrane merges with the presynaptic membrane, and its contents are released into the cleft. This release by membrane fusion is called exocytosis. Calcium does not carry the neurotransmitter across the gap; it helps trigger release on the sending side.

Use the numbered diagram to locate each event. In particular, distinguish the calcium ions entering the terminal in step 2 from the neurotransmitter molecules entering the cleft in step 3.

A presynaptic action potential opens calcium channels in the axon terminal; calcium entry triggers vesicle release. Neurotransmitter then crosses the synaptic cleft, binds receptors on the postsynaptic cell, and is eventually cleared. The postsynaptic channel shown is one example, not the only kind of neurotransmitter receptor.


Across the gap: a chemical meets a receptor

Once released, neurotransmitter molecules diffuse across the synaptic cleft. Some bind to receptor proteins on the postsynaptic membrane. The receptor matters because binding must be converted into a change in the receiving cell; neurotransmitter in the gap alone is not yet a postsynaptic response.

One way this happens is direct. A ligand-gated ion channel is both a receptor and a channel: when the neurotransmitter binds, the channel changes its opening state, altering ion movement across the postsynaptic membrane. Another way is indirect. A receptor can activate an intracellular signalling pathway that subsequently changes the cell’s activity, sometimes including its ion channels. The diagram illustrates the direct, channel-opening case. Not every chemical synapse uses that case.

Watch the next part of the animation for both possibilities. Its description of chloride entering and making a cell more negative is a useful introductory example of inhibition, not a rule for every inhibitory synapse; the outcome depends on the ion gradients and channels in that cell.

Neuroscience basics: Synaptic transmission - Chemical synapse, Animation

Continue “Neuroscience basics: Synaptic transmission” for the receiving side of the handoff. Its contrast between direct channel opening and an intracellular pathway is more important here than memorising the neurotransmitter examples.

Watch postsynaptic responses. Notice that binding to a receptor can change a cell through different mechanisms, and that a chemical messenger’s effect depends on the receptor and cellular context.

This distinction will matter for dopamine later in the course. Do not assume that dopamine simply opens the ligand-gated channel drawn in the synapse diagram. For now, the general principle is enough: a released messenger binds a suitable receptor, and that receptor determines how the receiving cell responds.



A postsynaptic response is not necessarily another spike

In the diagram’s direct-channel example, altered ion movement produces a local, graded change in postsynaptic membrane voltage. “Graded” means the response can vary in size. It differs from the all-or-none action potential you traced last lesson.

Some postsynaptic changes make a neuron more likely to reach the threshold for its own action potential. These are excitatory postsynaptic potentials (EPSPs). Others make firing less likely; these are inhibitory postsynaptic potentials (IPSPs). An EPSP is not itself a promise that the receiving neuron will fire. That neuron may be receiving many signals at once, including opposing ones.

Read the Khan Academy account to see how local responses can combine. Treat the graph’s voltages as illustrative rather than values every neuron must have.

The synapse (article) | Human biology

Khan Academy’s “The synapse” explains the difference between a local postsynaptic change and a new action potential. Read it to connect receptor activation with the receiving neuron’s overall response.

Under “Excitatory and inhibitory postsynaptic potentials,” read postsynaptic effects. Then, under “Spatial and temporal summation,” read the spatial example. After the spatial-summation graph, continue from the paragraph beginning “On the other hand” through the temporal example. Focus on why one presynaptic spike need not cause a postsynaptic spike.

The useful causal distinction is between producing an input and determining the receiving neuron’s output. One presynaptic action potential can cause neurotransmitter release and a postsynaptic effect, yet the receiving neuron may remain below threshold. Inputs arriving at different places or close together in time can combine; inhibitory inputs can change the result. If threshold is reached, the postsynaptic neuron generates its own action potential using its own voltage-gated channels.



How the message ends

A messenger cannot keep activating receptors indefinitely if the synapse is to respond distinctly to later activity. Neurotransmitter concentration near the receptors falls through several possible processes: molecules can be taken back up by a transporter, broken down by an enzyme, or diffuse away. Nearby cells can also help clear some neurotransmitters. Which route dominates depends on the transmitter and synapse; the three clearance routes in the diagram are alternatives, not mandatory consecutive steps.

Read the short final portion of the article for clearance and for an important contrast between spikes and synapses.

The synapse (article) | Human biology

Return to Khan Academy’s “The synapse” to complete the sequence. The final portion also explains why an all-or-none arriving spike need not produce an identical synaptic response every time.

Under “Signal termination,” read clearance mechanisms, including the following sentence about nearby glial cells. Then move to “Chemical synapses are flexible” and read synaptic flexibility. Focus on the difference between the form of an individual spike and the variable amount of transmitter released or effect produced.

To consolidate the visual sequence, spend a few minutes sketching two separated cell membranes. Put a vesicle and a voltage-gated calcium channel on the presynaptic side, and a receptor on the postsynaptic side. Mark where calcium enters, where neurotransmitter moves, and where postsynaptic ion movement might occur. Keep the three movements distinct: they involve different substances and locations.



The handoff in one account

An action potential depolarizes the presynaptic terminal. Voltage-gated calcium channels open, calcium enters, and vesicles fuse with the terminal membrane to release neurotransmitter. The neurotransmitter diffuses across the cleft and binds postsynaptic receptors. Receptor activation changes the receiving cell’s activity—sometimes producing a local voltage change that makes a new spike more or less likely, but not guaranteeing one. Clearance reduces the available neurotransmitter so the signal can subside.

The key boundary is now clear: the arriving spike stays in the sending cell; a chemical messenger crosses the cleft; the receiving cell generates its own response. Next lesson, you’ll use this mechanism to spot and correct errors in an annotated synapse diagram.