Skip to main content

Welcome to a Grasp lesson

Create a free account to keep studying and create your own study path.

Lesson 5

Voltage-Gated Ion Channels and Action Potential Propagation

Recommended resources

Hello. Last lesson, you explained why a neuron has a negative resting membrane potential: ion gradients provide the driving forces, and open channels determine which ions can move. Today, you’ll use that starting condition to trace an action potential—a brief change in membrane voltage that is regenerated along an axon.

The central question is not “How does electricity flow all the way down the neuron?” It is how a change in voltage at one patch of membrane causes the next patch to change. Allow about 35–40 minutes for the video segments, readings, and this lesson.


From resting voltage to a rising signal

A neuron at rest has relatively more sodium outside than inside. At its negative resting voltage, sodium has both a concentration tendency and an electrical tendency to move inward—if a channel gives it a route. Recall that the potassium leak channels discussed last lesson are already open. The channels central to today’s signal are different: voltage-gated channels change state in response to membrane voltage.

A stimulus can make the membrane near the beginning of the axon less negative. This change is called depolarization. If it is sufficient to reach threshold, many voltage-gated sodium channels open. Sodium enters, making that patch still less negative; this opens more sodium channels. That reinforcing effect produces the rapid rising phase of an action potential.

Watch the first segment for the shape of the voltage trace and the reason the rising phase accelerates. The video uses one set of illustrative voltages; neither resting voltage nor threshold is identical in every neuron.

10-Minute Neuroscience: Action Potentials

Watch “10-Minute Neuroscience: Action Potentials” from Neuroscientifically Challenged to see voltage-gated channels linked to a changing membrane-voltage graph.

Watch spike generation, from the graph’s resting voltage through sodium entry and the start of potassium-driven recovery. Focus on what changes before the rapid rise and why sodium entry reinforces it. Near the end, the video mentions the sodium–potassium pump; it maintains the ion gradients over time, but it is not what produces the rapid falling phase of each spike.

Threshold is not a signal that arrives from elsewhere or a fixed number to memorise. It describes the point at which, in that patch of membrane, sodium-channel opening becomes sufficiently self-reinforcing to produce a spike. A smaller depolarization may change the voltage without producing one. Once a spike is initiated, a stronger input generally does not make that individual spike proportionally taller; it can affect whether spikes occur and how often they occur.



One patch of membrane: rise, fall, and reset

The rising phase cannot continue indefinitely. Voltage-gated sodium channels soon become inactivated: they no longer conduct sodium even though the membrane has recently been depolarized. Meanwhile, voltage-gated potassium channels open more slowly. Potassium leaves through these channels, removing positive charge from the inside. Together, reduced sodium entry and increased potassium exit bring the voltage back down—repolarization.

Potassium channels also close with a delay. Their continuing outward current can briefly make the membrane more negative than its usual resting voltage. This undershoot, or afterhyperpolarization, ends as the channels close and the membrane returns toward rest. Sodium channels, after repolarization, reset from the inactivated state to a closed state that can open again.

Use this diagram to keep voltage separate from channel state. The large dark-red curve is membrane voltage over time; the smaller curves and channel drawings show how sodium- and potassium-channel activity changes during it.

The dark-red trace shows a local action potential. Beside it, sodium channels open and then inactivate, while potassium channels open later and remain open into the afterhyperpolarization; the lower labels mark refractory periods.

Read the textbook account now for a closer look at threshold and the different timing of the two voltage-gated channels.

12.4 The Action Potential - Anatomy and Physiology | OpenStax

OpenStax explains why sodium-channel opening starts a spike, why the spike stops rising, and why potassium channels produce a delayed undershoot.

In Section 12.4, under “The Action Potential,” find the paragraph beginning “The question is, now, what initiates the action potential?” Read from its discussion of the membrane remaining at rest through threshold initiation. Then move to the paragraph beginning “As we have seen, the depolarization and repolarization of an action potential…” and read channel timing. Track the distinction between a sodium channel that is closed and ready and one that is inactivated and unavailable.

A compact way to trace the mechanism at one location is:

Phase Main channel change Main effect on voltage
Rest Voltage-gated sodium and potassium channels are mostly closed Voltage is negative
Rising phase Sodium channels open rapidly Sodium enters; voltage rises
Falling phase Sodium channels inactivate; potassium channels are open Potassium exits; voltage falls
Undershoot and recovery Potassium channels close gradually; sodium channels reset Voltage briefly falls below rest, then returns toward it

This does not mean the pump must swap back every sodium and potassium ion before another spike can occur. A spike moves only a small fraction of the cell’s total ions. The immediate voltage changes come chiefly from channel opening, inactivation, and closing; the pump helps preserve the gradients that make repeated signalling possible.



From one patch to the next

An action potential is not one packet of sodium travelling from the start of an axon to its end. When sodium enters through channels at one patch, the resulting electrical change spreads into the adjacent interior and depolarizes nearby membrane. If that next patch reaches threshold, its own voltage-gated sodium channels open and generate a new rising phase. Repeating this locally regenerates the signal along an unmyelinated axon.

The textbook’s propagation section makes the important distinction between this short-range spread and fresh channel opening farther along.

12.4 The Action Potential - Anatomy and Physiology | OpenStax

Continue in the same OpenStax reading to connect the local spike to travel along the axon, then compare unmyelinated and myelinated conduction.

In Section 12.4, find “Propagation of the Action Potential.” Begin with adjacent membrane. Then, from the paragraph beginning “Propagation, as described above, applies to unmyelinated axons,” read through myelinated conduction. Focus on where a fresh action potential is generated. Interpret “jumps” as shorthand: electrical change still spreads through the membrane between nodes.

Normally, the spike travels away from its initiation site toward the axon terminals. The patch just behind it is temporarily refractory because many sodium channels there are inactivated and cannot immediately reopen. During this absolute refractory period, another spike cannot start at that patch. Later, sodium channels become available again, but lingering potassium conductance can make a new spike harder to initiate; this is part of the relative refractory period. Refractoriness helps explain forward travel during ordinary initiation, though an axon artificially stimulated in its middle can conduct in both directions.

Many axons are wrapped in myelin, which reduces electrical leakage across the covered membrane. A change generated at one uncovered gap can therefore spread effectively through the covered segment to the next gap. These gaps, called nodes of Ranvier, have a high density of voltage-gated channels: the action potential is regenerated at each node rather than continuously along every covered patch. This pattern is saltatory conduction. It is faster than continuous regeneration along a comparable unmyelinated axon, although speed varies with properties such as axon diameter and myelination.

The upper detail shows myelin surrounding an axon and voltage-gated channels concentrated at a node of Ranvier. Below, an unmyelinated axon regenerates its spike along successive patches, whereas a myelinated axon regenerates it at nodes with electrical spread between them; the labelled speeds are illustrative, not universal.

Watch the final segments with that distinction in mind: passive electrical spread between regeneration sites is not the same event as a newly generated spike at those sites.

10-Minute Neuroscience: Action Potentials

Return to “10-Minute Neuroscience: Action Potentials” for its visuals of axon propagation, nodes, and the brief limits on firing again.

Watch axon propagation for adjacent-channel activation and regeneration at nodes. Then skip to refractory periods for why sodium-channel inactivation and lingering potassium current affect the next spike. Treat “leaping” as a visual shorthand, not literal disappearance of the signal between nodes.



The mechanism you can carry forward

An action potential begins when sufficient depolarization opens voltage-gated sodium channels. Sodium entry reinforces the depolarization, producing a rapid rise. Sodium-channel inactivation and delayed potassium-channel opening end that rise and bring the voltage back down. The electrical change at one location depolarizes the next, where a new spike can be generated; myelin allows longer spread between regeneration sites at nodes.

This mechanism tells you how a neuron carries an electrical signal along its axon, not yet how it communicates with another cell. Next lesson, you’ll follow an arriving action potential into a chemical synapse and trace how it can produce a response on the other side.