Skip to main content

Welcome to a Grasp lesson

Create a free account to keep studying and create your own study path.

Lesson 4

Fairness Goals in Electoral Districting: Representation, Symmetry, and Competitiveness

Recommended resources

Hello. This module shifts from how district boundaries turn votes into seats to a harder issue: what makes that translation fair? This lesson compares three answers—proportional representation, partisan symmetry, and electoral competitiveness. Each identifies a real concern, but they need not favor the same map.

The examples use equal-sized districts with two parties, A and B. They are deliberately small enough to inspect. They show what a fairness measure values, not whether a particular set of district totals could be drawn on a real geographic map.


Proportionality: Does seat share track vote share?

A proportional outcome gives a party roughly the same share of seats as its share of votes. If A wins 60% of votes across an area electing ten representatives, six seats is the proportional benchmark. With only ten seats, exact proportionality is not always possible: a vote share of 54% cannot become exactly 5.4 seats.

It helps to distinguish a benchmark from an electoral system. You can use proportionality to assess the result of a single-member district map, but winner-take-all elections in each district do not allocate seats proportionally. Proportional representation instead refers to electoral arrangements designed to make seat shares track vote shares more closely, commonly by electing several representatives from a larger district. This changes the role of boundaries rather than merely selecting a different single-member map.

Group urges Congress to adopt proportional representation to end redistricting battles

Watch “Group urges Congress to adopt proportional representation to end redistricting battles” from PBS NewsHour for its concise contrast between single-member and multi-member districts.

Watch the proposed mechanism. Focus on why allocating several seats according to vote shares can give a group representation even when it would lose a winner-take-all contest.

Proportionality is appealing when the chief concern is that a substantial share of voters receives little representation. Yet it is not automatically the rule for judging a single-member map. A map can produce a proportional result in one election without reliably doing so in another, and a map that misses proportionality might still treat the two parties alike under a different test.



Partisan symmetry: Would the rule work the same way for either party?

Partisan symmetry asks whether the parties have equal opportunities to convert votes into seats. If A would win eight of ten seats with 60% of the vote, symmetry asks whether B would also win eight of ten seats if B had 60%. It does not insist that either party receive only six seats. Both parties can receive the same seat bonus when they attain the same vote share.

That comparison requires more than one observed election. Analysts can estimate how a fixed set of districts would perform at other statewide vote shares—for example, by adding the same percentage-point change to A’s vote share in every district. This uniform swing is a simplifying assumption, not a prediction that every district’s voters would actually shift together.

Redistricting and Representation

Read the American Academy of Arts & Sciences discussion for a visual explanation of partisan symmetry and the seats-votes plot used to express it.

In the passage on partisan symmetry immediately above Figure 2, begin with “Partisan symmetry is a principle for districting plans.” Read the explanation through the comparison of the two seats-votes curves. Focus on why a single election result is not enough to describe how a plan treats both parties.

A compact way to state the principle is to let mean the share of seats A would win with vote share . A symmetric plan would satisfy, apart from complications such as tied districts,

For example, if A wins 80% of seats at 60% of votes, A should win 20% of seats at 40% of votes—equivalently, B should win 80% when B has 60%. At an exact 50–50 vote split, symmetry calls for an even split of seats. But away from that midpoint, it does not call for seats and votes to have the same percentages. A later lesson will examine seats-votes curves more closely; for now, the crucial distinction is equal treatment of the parties versus equal percentages of votes and seats.



Competitiveness: How close are the district contests?

A competitive district is one in which neither party has a large advantage. One way to count such districts is to use an election margin: a 51–49 result is close, while a 60–40 result is not. A mapmaking goal of competitiveness might seek more districts where the result could plausibly change with a modest shift in support.

The following chart uses a margin of five percentage points or less to classify swing House districts. It shows a decline in districts meeting that definition over the period shown.

The purple line counts U.S. House districts classified as swing seats, while the other lines count districts classified as Democratic- or Republican-leaning. Fewer districts meet the chart’s competitiveness definition near the end of the period than at its start; the chart alone does not establish why.

Competitiveness addresses a different concern from proportionality or symmetry. Close contests may make representation more responsive to changes in voter support. But closeness is not the same as fairness to either party: many narrow wins can all go to one side. Nor does an observed close margin guarantee that a district will remain competitive in future elections.

Read the chart as descriptive, not causal. It does not show that redistricting alone produced the trend, or that every district outside the swing category was intentionally made safe. Separating mapmakers’ choices from voter geography and other influences comes later in the course.



Three goals, different verdicts

Consider two possible sets of results for the same statewide electorate: 1,000 voters, split evenly between A and B, in ten equal-sized districts of 100 voters each. The figures describe possible allocations of those voters among districts; they do not assert that both allocations satisfy the geography of a particular place.

Arrangement A votes in each district A’s seats Districts decided by at most 5 percentage points
P Five districts with 60; five with 40 5 of 10 0
C Eight districts with 51; two with 46 8 of 10 8

Check the statewide totals: P gives A votes; C gives A . The electorate is evenly divided in either case.

Proportionality favors P. A has 50% of votes and 50% of seats, rather than 50% of votes and 80% of seats. Competitiveness favors C by the five-point-margin definition: eight contests are 51–49, whereas every contest in P is 60–40.

Symmetry also objects to C’s result at this vote share. When A and B each have 50% of the vote, C gives A eight seats and B only two. Equal statewide support has not translated into equal representation. P divides the seats evenly at this point, though one observed point alone would not establish how a real plan behaves across every possible vote share.

C reveals another limitation of treating closeness as the overriding goal. Under a hypothetical uniform swing of just two percentage points away from A, its eight 51–49 districts become 49–51 districts. A would then win no seats instead of eight. This is not a forecast; it shows how a collection of close contests can produce a very large seat change from a small vote change.

There is a separate tension between symmetry and proportionality. Suppose A has 60% of 1,000 votes in ten equal districts:

  • In arrangement S, A’s district vote totals are 75, 73, 65, 64, 63, 57, 56, 55, 47, and 45. A wins eight seats. Under a uniform ten-point swing away from A, the statewide vote becomes 50–50 and the seats become 5–5. Under a further ten-point swing, A has 40% of votes and two seats. Thus A gets eight seats at 60%, and B gets eight when B has 60%: the illustrated outcomes are symmetric.
  • In arrangement Q, A gets 70 votes in each of six districts and 45 in each of four. A still has 600 statewide votes, but wins six seats. This election’s result is proportional. Yet a uniform ten-point swing away from A produces a 50–50 statewide vote while A still wins six seats, revealing asymmetry at that point.

S illustrates why a symmetry standard can accept an 80% seat share for 60% of votes: it asks whether either party would receive the same advantage with 60%. Q illustrates why a proportional result in the election you can see does not, by itself, establish symmetric treatment across other vote shares. Neither calculation tells you whether a geographically valid version of the arrangement could be drawn; that is a separate inquiry.



Choosing a benchmark is part of the judgment

These measures begin with different questions:

Goal What it prizes What it does not establish on its own
Proportionality Seat shares resembling vote shares Equal treatment at other vote levels
Partisan symmetry Comparable vote-to-seat opportunities for both parties Proportional seat shares
Competitiveness More close district contests Proportionality or partisan symmetry

A single label such as “fair map” can conceal this choice of benchmark. The choice also interacts with constraints on drawing real districts. Voters do not live in interchangeable positions, so a result may be difficult to change without altering how communities are divided.

Redistricting and Representation

Return to “Redistricting and Representation” for its short discussion of why choosing a fairness baseline matters when voters are unevenly distributed.

In the earlier discussion of redistricting concerns, find the consecutive paragraphs beginning “Fourth, there is what you might call a baseline problem” and “Fifth, voters are not distributed randomly across a polity.” Read those two concerns, stopping before the paragraph beginning “Finally, the only way to remove politics from the process.” Focus on the difference between selecting a fairness goal and determining what maps are feasible given where voters live.

The practical conclusion is not that measurement is futile. It is that a measure becomes informative when its question and limits are explicit. A close contest does not guarantee balanced representation; a proportional election result does not guarantee equal treatment under changed votes; and a symmetric seat bonus is still a departure from proportionality.



Conclusion

Proportionality compares vote share with seat share. Partisan symmetry compares how the same vote share would translate into seats for either party. Competitiveness counts districts with close contests. The examples show why a map can look good by one standard and poor by another, even before geographic constraints enter the picture.

The next lesson introduces the efficiency gap, which judges partisan advantage using votes that do not contribute to winning seats. It adds another benchmark—and another reason to examine what a fairness score assumes before treating it as a verdict.