Hello. This short course begins with the question behind nearly every fusion milestone: does the plasma produce enough energy, under conditions that can be maintained, to justify the energy needed to keep it hot? Later lessons will use that question to interpret experimental results and assess proposed power plants.
In this first session, you will build a simplified energy balance for deuterium–tritium (D–T) fuel. The aim is not to design a reactor, but to understand what temperature, density, and energy confinement time tell us—and what they do not. Allow about 30 minutes, including the short video and reading.
What must happen in the fuel?
A fusion reaction needs two nuclei to get close enough to join. Temperature matters because it sets their typical kinetic energy; density matters because it sets how many potential encounters occur. Neither guarantees useful power if the fuel loses its heat too quickly.
Watch this brief introduction before we put numbers on those ideas.
Watch “Fusion Triple Product” from Commonwealth Fusion Systems for a visual introduction to the three quantities. We will give “confinement time” a more precise definition below.
Watch the three factors, from the introduction of the triple product through the explanation of confinement as thermal insulation. Focus on why abundant fusion collisions and good heat retention are separate requirements.
For terrestrial power research, D–T is a leading fuel choice because its reaction rate is relatively favorable at achievable plasma temperatures. Each successful reaction releases about : roughly in a charged helium nucleus, called an alpha particle, and in a neutron. That division matters. An alpha particle can deposit its energy back into the plasma; the neutron generally escapes the plasma and deposits its energy in surrounding material. Neutron energy may eventually be harvested as heat, but it does not directly keep the fuel hot.
The plasma’s energy budget
Think of the hot plasma as an energy inventory . External heaters add power ; retained alpha particles add self-heating . Heat escapes through transport, and radiation can carry energy away. For a steady plasma, a useful simplified balance is
Here energy confinement time, , is defined as divided by the transport heat-loss rate. It describes how well the plasma retains thermal energy—not how many seconds an experiment runs. A device could operate for many seconds while continuously replacing heat lost on a much shorter .
This equation keeps radiation separate so that it is not counted twice. Confinement-time conventions can differ between reports; when comparing numbers, check which losses their definition includes.
The following slide introduces the same balance and the distinction between neutron energy and alpha heating. Its notation is denser than we need, so concentrate on the physical statements rather than the integral.
[PDF] Magnetic Confinement Fusion Research - NSTX-U
Read the “Lawson Criterion for DT Fusion Energy Gain” slide in the magnetic-confinement lecture PDF. It connects heat loss, fusion power, and alpha heating in one place.
Find the slide numbered 14, titled “Lawson Criterion for DT Fusion Energy Gain” (immediately after the “Energy Production by DT Fusion” slide). Read the power balance, continuing through the numerical ignition condition at the bottom. Focus on the definition of energy confinement time and the sentences about the escaping neutron and trapped alpha particle. You can skim the proportionality and integral notation; we will unpack their meaning next.
Breakeven and ignition impose different demands on this budget:
- At plasma energy breakeven, fusion power equals external heating power: . This does not mean the plasma heats itself sufficiently to dispense with external heating.
- At ignition, alpha heating covers plasma losses without external heating in the steady-state balance. Since alphas carry only about one-fifth of D–T fusion energy, ignition requires substantially more than . A plasma can exhibit meaningful self-heating before reaching ignition.
These are plasma milestones. Neither includes all the electricity needed to operate a facility or the efficiency of converting captured heat to electricity.
Why the Lawson criterion combines three quantities
Suppose deuterium and tritium have equal densities. At a fixed temperature, doubling the fuel density makes each species twice as abundant, so the number of possible D–T pairs—and approximately the fusion power per unit volume—rises fourfold. By contrast, the plasma’s stored thermal energy rises approximately twofold. The confinement time determines how quickly that stored energy leaks away.
A compact way to express the approximate dependence is
The term describes how readily D–T ions fuse at ion temperature ; you need not calculate it here. For this simple estimate, take electron and ion temperatures to be similar and the electron density to be approximately the total fuel-ion density. Comparing fusion power with heat loss then explains the Lawson criterion: at a specified temperature, the product of density and energy confinement time must be large enough for the desired energy balance.
Near a useful D–T operating temperature, a common shorthand is the triple product, . The lecture slide gives an illustrative ignition estimate of about
under its stated approximations. If is about , that corresponds to of roughly . For an illustrative density of , the implied confinement time is on the order of four seconds. Treat this as an order-of-magnitude guide, not a universal pass mark: the threshold changes with temperature, fuel mixture, radiation, and the precise quantities being reported.
It is tempting to treat the three factors as freely interchangeable. They are not. Higher temperature initially improves D–T reaction rates, but heating the plasma also increases its energy inventory, while radiation and other losses matter. Higher density increases collisions, but also changes pressure and some losses; maintaining confinement may become harder. The triple product is therefore a useful performance summary alongside the actual temperature and loss conditions, not a complete verdict on a machine.
A small power-balance example
Consider a hypothetical plasma producing of fusion power. Assume its alphas deposit in the plasma, its stored thermal energy is , and radiation is negligible. Holding its temperature and density fixed, improved confinement changes the external heating required:
| Energy confinement time | Transport heat loss | External heating needed | Result |
|---|---|---|---|
| : breakeven | |||
| : alpha and external heating are equal | |||
| Ignition in this simplified balance |
The table is not an experimental result. It isolates one engineering insight: a fivefold plasma gain can still require external heat, whereas ignition means alpha heating alone replaces the losses. Adding radiation would raise the heating requirement or require better confinement.
Takeaway
D–T fusion releases substantial energy per reaction, but only the alpha particle’s share directly reheats the plasma. Temperature governs how readily ions fuse; density governs how many encounters are possible; energy confinement time governs how quickly the plasma loses its heat. The Lawson criterion combines these demands, while the power balance distinguishes plasma breakeven from ignition.
Next, you will use these distinctions to read published results: a high energy yield, a high gain, and a long-running plasma can each be important achievements without, individually, demonstrating net electrical output.