Skip to main content

Welcome to a Grasp lesson

Create a free account to keep studying and create your own study path.

Lesson 6

Blocking and Delaying Senate Nominations Under the 2025 Group-Consideration Procedure

Recommended resources

Welcome back. The previous lesson showed how budget reconciliation can bring certain legislation to a majority-vote passage without ordinary legislative cloture, while restricting what the bill may contain. Nominations take a different route: there is no Byrd-rule test, and cloture on a nomination itself now requires a majority rather than the usual three-fifths threshold for legislation.

This lesson focuses on a practical prediction: if a majority supports a nominee, can opponents prevent confirmation, or can they only delay it? The answer depends on where the nomination is in the process and whether the Senate considers it individually or as part of a group. Allow about 40 minutes for the short video, selected readings, and lesson.


A majority can end debate on an individual nomination

The Senate confirms presidential nominees; it does not pass a nomination as if it were a bill. Once a nomination is before the Senate, the confirmation question is decided by a majority of senators voting, with a quorum present. Debate on the nomination can be extended, so supporters may still need cloture to reach that confirmation vote.

The distinction from ordinary legislation is the cloture threshold. Senate decisions in 2013 lowered it to a majority for nominations other than Supreme Court nominations; a 2017 decision extended majority cloture to Supreme Court nominations. The following brief video segment introduces that contrast. It uses “51 votes” as shorthand for a majority when all 100 senators vote; the formal threshold is a majority of those voting, provided a quorum is present.

Senate filibusters and cloture

Watch “Senate filibusters and cloture” from Khan Academy for its concise explanation of how the nomination threshold changed.

Watch nomination cloture. Focus on why an opponent who lacks a majority can no longer rely on the ordinary legislative cloture threshold to stop a nomination already before the Senate.

Cloture still takes procedure and floor time. At least 16 senators sign a cloture motion on the pending nomination. Unless the Senate agrees otherwise, the cloture vote occurs on the second day of Senate session after filing. If a majority votes for cloture, debate is brought toward a close—but confirmation is not automatic. The Senate may continue considering the nomination for a limited period before voting on confirmation.

Senate Consideration of Presidential Nominations: Committee and Floor Procedure | Congress.gov | Library of Congress

Read the Congressional Research Service account to connect the majority cloture vote with the time that can still follow it.

In the “Cloture” subsection under “Floor Procedures,” read the cloture procedure, then the time limits. In “Table 1. Maximum Number of Hours of Post-Cloture Consideration of Individual Nominations,” compare the positions assigned two hours with those assigned 30 hours. Focus on floor time considering the nomination, not elapsed clock time.

For most individual nominations, post-cloture consideration is limited to two hours. The limit is 30 hours for nominations to the Supreme Court, U.S. circuit courts of appeals, and 21 specified high-ranking executive positions, including heads of executive departments. A district court nomination has a two-hour limit even though it is a judicial nomination. The Senate must generally be in session with the nomination pending for this time to run; a recess does not simply use it up.

Suppose 52 senators support confirmation of a nominee who is already eligible for floor consideration, and those same senators support cloture. Opponents can withhold unanimous consent to a quick vote and require the cloture process and available post-cloture time. They cannot defeat cloture merely by pointing to the 60-vote rule for ordinary bills. If the majority remains together and the Senate makes time for the process, the opponents’ floor-debate tactic delays rather than blocks confirmation.



First check whether the nomination can reach the floor

That prediction has an important boundary. A majority willing to confirm someone is not the same thing as a nomination that is pending before the full Senate. Most nominations are referred to a committee. A committee can report a nomination, but it can also take no action. Majority cloture on the nomination does not itself pull an unreported nomination out of committee.

Under the regular rules, the Senate may discharge a committee by unanimous consent. Without that consent, a discharge motion or resolution is debatable, and ending debate on it may require three-fifths support. This is a distinct procedural obstacle—not a return to 60-vote cloture on the nomination itself.

Senate Consideration of Presidential Nominations: Committee and Floor Procedure | Congress.gov | Library of Congress

Return to the Congressional Research Service report for the qualification that makes a floor-only prediction incomplete.

In “Discharging a Committee from Consideration of a Nomination,” read the discharge discussion. Distinguish cloture on a discharge motion from cloture on a pending nomination.

The careful conclusion is therefore conditional: once a nomination is available for floor consideration, majority opponents cannot sustain a debate filibuster against a majority-backed nomination. Earlier obstacles—including committee inaction—and decisions about whether to allocate scarce floor time can still keep a nomination from receiving a vote. “Only delay” describes the opponents’ power over debate on the pending nomination, not a guarantee that every nominee will eventually be confirmed.



The 2025 procedure can bring eligible nominations to a group vote

A separate question arises when supporters want to confirm several nominees together, or en bloc. Unanimous consent has long been a way to group nominations quickly, but an objection can prevent that shortcut. A procedure established in September 2025 gives a majority a route to consider certain eligible nominations as a group without unanimous consent.

The eligibility limit is crucial. To use majority cloture for the group procedure, each nomination must have a number in the “Nominations” section of the Executive Calendar. An Article III judge—such as a Supreme Court, circuit court, or district court nominee—is excluded. So is a nominee for one of the 21 specified high-ranking executive positions, such as Secretary of State or Attorney General. A nomination still in the “Privileged Nominations” section, or in “Nominations Placed on the Secretary’s Desk,” does not qualify merely because it appears somewhere on the Executive Calendar.

Senate Consideration of Presidential Nominations: Committee and Floor Procedure | Congress.gov | Library of Congress

Read the eligibility criteria in the Congressional Research Service report before considering the group’s voting sequence.

In “Nominations Eligible for en bloc Consideration,” read the criteria and exception. Continue with the calendar explanation. Focus on why an ineligible nomination changes the cloture calculation for the proposed group, without changing majority cloture for that nominee when considered individually.

If an ineligible nominee is included in a proposed group, supporters cannot invoke cloture on that group by simple majority under the 2025 procedure; the report describes a three-fifths cloture threshold for such a group. That does not mean an Article III judge or a high-ranking executive nominee requires three-fifths cloture when considered alone. Group eligibility and individual cloture are separate tests. Supporters may consider an excluded nominee individually under the majority-cloture rule.

For eligible nominees, the new group route has two stages. First, the Senate considers and approves an executive resolution identifying the nominations to be taken up together. That resolution authorizes group consideration; it does not confirm anyone. Second, the Senate takes up the identified nominations en bloc and votes on their confirmation. Without an agreement to speed matters up, each stage can involve its own cloture vote, its own waiting period, and up to 30 hours of post-cloture consideration. Approval of the resolution and confirmation of the group are separate majority votes.

[PDF] Consideration of Nominations En Bloc ... - Congress.gov

Read the Congressional Research Service’s numbered procedure to see where a majority must act twice.

In “Steps for Consideration of Nominations En Bloc,” begin at the two-stage sequence. Read numbered steps 1–11, concentrating on the cloture vote and final vote for the executive resolution, then the separate cloture vote and confirmation vote for the nominations. Treat unanimous-consent agreements mentioned afterward as possible ways to shorten the schedule, not as requirements for using the procedure.

The following Congressional Research Service diagram lays out a hypothetical schedule. Its “Day 10” is an illustration, not a deadline or a promise that every group will take ten days.

A hypothetical two-stage path for eligible nominations: cloture and a majority vote on an executive resolution come first; separate cloture and a majority confirmation vote on the group come second. Each stage can include a two-session-day cloture wait and up to 30 hours of post-cloture consideration.

Notice why the diagram separates days of session from hours of consideration. Only days when the Senate meets count toward the illustrated cloture waiting periods. Under the rule, post-cloture time generally runs while the Senate is in session considering the matter on which cloture was invoked, though unanimous-consent agreements can change scheduling arrangements. The procedure lets a majority overcome an objection to grouping eligible nominations, but it is not an instant confirmation mechanism.



Making the prediction precisely

For a simplified nomination scenario, make four checks in order:

  1. Floor access: Has the nomination reached the stage where the Senate can take it up? If it remains in committee, do not assume majority cloture on the nomination solves that earlier problem.
  2. Individual or group: If considered individually, cloture on any nomination requires a majority of senators voting, with a quorum present. If considered under the 2025 en bloc procedure, check every nomination against its eligibility limits.
  3. Time after cloture: Allow up to two hours for most individual nominations, 30 hours for the specified individual exceptions, or 30 hours at each of the two en bloc stages. These are limits on consideration, not automatic elapsed-time countdowns.
  4. The final vote: Cloture ends extended debate; it does not approve a nominee. Confirmation—individual or en bloc—still requires a majority vote.

A coalition can therefore be strong enough to confirm a nominee but unwilling or unable to use a proposed group route. It might remove the ineligible nominee from the group or consider that nominee individually. Conversely, a procedurally eligible nominee can still lose if the majority does not support confirmation when the final vote arrives.



Key takeaways

Majority cloture on all individual nominations means a minority cannot use extended floor debate alone to block a pending nomination that retains majority support. Opponents can nevertheless require the cloture process and available post-cloture consideration, while committee and scheduling obstacles call for a more qualified prediction.

The 2025 en bloc procedure offers a majority a way to confirm eligible nominations as a group over objections, but it requires an executive resolution followed by a separate stage for the nominations themselves. Article III judges, the 21 specified high-ranking executive positions, and nominations not yet numbered in the “Nominations” section of the Executive Calendar do not qualify for that majority-cloture group route. Their exclusion does not take away majority cloture when their nominations are considered individually.

The next module examines how the Senate established changes to nomination procedure and how that method differs from formally changing its written cloture rule.