Welcome to the final lesson. So far, you have distinguished spot VIX from VIX futures and seen why a product that rolls futures can diverge from spot VIX. There is one further source of divergence: some futures-linked products seek a multiple of their benchmark’s return each day. The word each changes the result when the product is held for two days or longer.
By the end of this lesson, you will be able to calculate a two-day return for a daily-reset inverse product and explain why it differs from applying its stated multiple to the benchmark’s two-day return. This is arithmetic about a product’s return objective—not a way to predict what VIX or shares will do.
What the daily multiple applies to
Imagine a product whose benchmark is an index of a rolling VIX-futures strategy, like the kind discussed in the previous lesson. Suppose the product seeks −2 times that benchmark’s daily percentage return. If the benchmark rises 10% on one day, the product aims to lose 20% that day. If the benchmark falls 10% on another day, it aims to gain 20% on that day’s starting product value.
The benchmark here is not spot VIX. Nor does a −2x label promise twice the opposite of spot VIX’s change over a month. First identify the product’s specified futures benchmark; then identify the period—usually one day—over which its multiple is targeted.
This short video introduces daily return objectives and explains why products rebalance to maintain their target multiple.
What Are Leveraged & Inverse ETFs & ETNs & How Do They Work?
Watch “What Are Leveraged & Inverse ETFs & ETNs & How Do They Work?” from Charles Schwab for its explanation of daily leverage and resetting.
Watch the daily objective for a one-day 2x example. Then skip to daily resetting for the distinction between a one-day target and a longer holding-period return. Focus on why the product’s exposure must be adjusted after its value changes.
A reset means the product adjusts its exposure so that the next day’s target multiple is based on its new value. It does not erase the previous day’s gain or loss. That distinction is the heart of the calculation.
Two days in an inverse product
The image below uses a generic index and a −2x daily-reset ETF. It is not a record of VIX futures prices. The same return arithmetic would apply if the generic index were replaced by a VIX-futures benchmark with these daily returns.

Start both the benchmark and the hypothetical product at 100. We will assume the product hits its daily target exactly and ignore fees and tracking differences for now.
| Start | After benchmark rises 10% | After benchmark falls 10% | |
|---|---|---|---|
| Futures benchmark, in this hypothetical application | 100 | 110 | 99 |
| Daily −2x product | 100 | 80 | 96 |
On the first day, the benchmark’s 10% gain means the −2x product loses 20% of its starting 100. It finishes at 80. On the second day, the benchmark falls 10% from 110, ending at 99. The product aims to gain 20% of its new starting value of 80, so it gains 16 and finishes at 96.
The percentage moves sound symmetrical: up 10%, then down 10%. The dollar changes are not symmetrical because they use different starting values. For the benchmark, the changes are +10 and −11. For the product, they are −20 and +16.
The image’s “exposure” columns show why the reset matters. Exposure is the size of the position linked to the benchmark; a negative sign denotes exposure that benefits when the benchmark falls. At the start, −2 times the product’s value of 100 is −200. After the first day’s loss, the product is worth 80, so it adjusts its exposure to −160 for the next day. When the benchmark then falls 10%, that −160 exposure produces a gain of 16. Without the reset, you would be calculating a different strategy.
Now compare the two-day returns:
Multiplying the benchmark’s two-day return by −2 would suggest +2%. The product instead returned −4%, even though it met its −2x target on both individual days. The stated multiple was never a promise about the two-day cumulative return.
The calculation you can reuse
Let and be the benchmark’s returns on days one and two, written as decimals. Let be the product’s targeted daily multiple: for example, for the inverse product above or for a 2x long product.
To get the benchmark’s two-day return, compound its daily returns:
Under the simplifying assumption that the product meets its daily target exactly, its two-day return is:
For the image’s path, , , and . Substitution gives:
That is the −4% found by following the values in the table. The incorrect shortcut is to calculate instead: it applies a daily multiple to a two-day return.
The same issue arises for a +2x product. On this benchmark path, it would rise 20% on day one and fall 20% on day two. Starting at 100, it would finish at , also a −4% return—not twice the benchmark’s −1% two-day return.
Read the regulator’s worked example to see this +2x calculation presented with a different order of daily moves.
Updated Investor Bulletin: Leveraged and Inverse ETFs | Investor.gov
Read the hypothetical two-day example in the Investor.gov bulletin. It reinforces the difference between meeting a daily objective and matching a multiple over the full holding period.
In “How can this apparent breakdown between longer term index returns and ETF returns happen?”, start with the bullet that begins “Let’s say that on Day 1.” Read the full example through the final comparison. Track the ETF’s value after the first day before calculating its second-day percentage gain.
Why the path matters—and where futures fit
A daily-reset product compounds its own sequence of returns. The sequence, not just the benchmark’s starting and ending levels, therefore matters. In the example above, a rise followed by a fall left the benchmark down only 1%, but both the −2x and +2x products down 4%. Larger back-and-forth moves can make this gap more pronounced.
That does not mean daily resetting creates a loss on every multi-day path. If a benchmark rises 10% on each of two days, its cumulative gain is 21%. An ideal +2x daily product gains 20% on each day, for a cumulative gain of 44%—more than twice 21%. The reliable rule is to compound the daily product returns, not to assume either a fixed two-day multiple or an inevitable loss.
FINRA’s two-day comparison makes the importance of the path concrete: it considers an inverse product when a benchmark returns to its starting level after either small or much larger swings.
Regulatory Notice 09-31 | FINRA.org
Read FINRA’s explanation of daily resetting and its comparison of two paths that both end where they began. The paths differ in the size of their daily swings.
In “Background and Discussion,” read the opening explanation from daily objectives. Then, in the paragraph beginning “This effect can be magnified in volatile markets,” read the path comparison. Focus on how the inverse product can have different returns even though the benchmark has the same starting and ending value in both cases.
For a VIX-futures-linked product, keep two distinct reasons for divergence in view:
- Futures-benchmark versus spot VIX: The rolling futures strategy can gain or lose while today’s spot VIX does something else. Futures price changes, changing contract weights, and expenses matter, as the previous lessons showed.
- Daily-reset product versus its futures benchmark: A leveraged or inverse product targets a multiple of that benchmark’s daily return. Compounding can make its multi-day return different from the stated multiple of the benchmark’s multi-day return.
Do not treat the futures roll headwind as a separate automatic charge in the two-day formula: the benchmark returns you put into the formula already reflect how that benchmark performed under its futures strategy. A real product can differ further from our idealized calculation because of fees, financing, tracking differences, and its particular terms.
Key takeaways
A −2x daily VIX-futures-linked product seeks the opposite of twice its specified futures benchmark’s return each day—not twice the opposite of spot VIX’s return over two days. In the worked example, the benchmark rose 10% and then fell 10%, ending 1% lower; the reset inverse product ended 4% lower. Calculating each day from the product’s updated value explains the result.
This completes the course’s central distinction: option prices inform the VIX’s 30-day implied-volatility measure; VIX futures reference later volatility windows; rolling futures products follow a futures strategy; and daily-reset products add another layer of compounding. A “VIX product” headline is useful only after you know which of those exposures it actually describes.