Skip to main content

Welcome to a Grasp lesson

Create a free account to keep studying and create your own study path.

Lesson 4

Selective Ion Permeability and the Resting Membrane Potential

Recommended resources

Hello. Last lesson, you used concentration and electrical gradients to predict which way an ion tends to move through an open channel. You also saw that potassium can remain more concentrated on one side of a membrane even when there is no net potassium movement.

Today we’ll apply that idea to a neuron. You’ll explain why its inside is usually electrically negative relative to its outside when the neuron is at rest, why the voltage is not determined by potassium alone, and what keeps the arrangement going. Allow about 35–40 minutes, including the video and reading.


From potassium movement to a voltage

A membrane potential is an electrical difference across a cell membrane. We report it as the voltage inside relative to outside. Thus, a resting membrane potential of means that the inside is 65 millivolts more negative than the outside; the exact value varies among neurons.

Start with a simplified membrane that has open channels for potassium but not for other ions. Potassium is more concentrated inside the neuron. Its concentration gradient therefore favours movement outward. As a small amount of positively charged potassium leaves, negative charges that cannot follow it remain on the inner side of the membrane. The developing negative voltage attracts potassium inward.

The two influences now oppose each other. If potassium were the only ion able to cross, the voltage would become more negative until its inward electrical tendency balanced its outward concentration tendency. This voltage is potassium’s equilibrium potential, often written . At that point there is no net potassium movement, though individual ions can still cross in both directions.

Panel A shows potassium leaving a simplified cell while negatively charged anions remain inside. Panel B shows the outward concentration tendency opposed by an inward electrical tendency. The pictured \(-80\ \mathrm{mV}\) illustrates a possible potassium-balance voltage, not a fixed resting voltage for every neuron.

Notice what the drawing compresses: the charge difference needed to produce a membrane voltage is concentrated near the membrane. The cell’s entire interior does not need to become predominantly negative. Only a small fraction of its potassium must move, so potassium can remain much more concentrated inside than outside.

Watch the visual explanation of this balance, then its extension to sodium. Treat the voltages quoted in the video as examples rather than values to memorise.

Neuron resting potential mechanism | Nervous system physiology | NCLEX-RN | Khan Academy

Watch “Neuron resting potential mechanism” from khanacademymedicine to see how potassium’s competing tendencies produce a voltage and why a real resting neuron does not stop at potassium’s equilibrium potential.

Watch potassium's balance, beginning where the presenter compares its inward electrical pull with its outward concentration tendency. Continue with sodium's influence, paying particular attention to the discussion beginning at 00:08:23 of sodium's much lower permeability at rest. Finally, watch ongoing leakage to distinguish a steady resting voltage from a complete stop in ion movement. You can stop at 00:10:09; the later discussion adds ions and transport mechanisms beyond what we need here.



Why a resting neuron is close to—but not at—potassium’s balance point

A real resting neuron is selectively permeable, not exclusively permeable, to potassium. Open potassium leak channels provide many routes for potassium, while fewer open routes allow sodium to cross. “Leak” means that a channel provides a route at rest; it does not mean that the ion is being pushed through it.

Sodium is generally more concentrated outside the neuron. At a negative membrane voltage, both its concentration and electrical tendencies favour movement inward. Each sodium ion that enters brings positive charge. Potassium movement tends to make the inside more negative; sodium entry tends to make it less negative. Because the resting membrane is much more permeable to potassium, its voltage lies closer to than to the voltage that would balance sodium alone.

The comparison matters more than a single number. For example, if a particular neuron’s potassium equilibrium potential were about and its resting potential about , the resting voltage would be negative, but not negative enough to balance potassium completely. Some potassium would still tend to leak outward. Sodium would tend to leak inward. Chloride permeability can also influence the resting voltage; its effect depends on the neuron and its chloride gradient, so we need not assign it one universal direction here.

Read the textbook’s diagrams alongside that explanation. Focus on the difference between ion distribution and membrane permeability: having a large concentration gradient does not, by itself, mean an ion has a large influence on the voltage.

The Membrane at Rest – Foundations of Neuroscience

Read “The Membrane at Rest” from Foundations of Neuroscience for its diagrams of open channels and its explanation of why the resting voltage is nearer potassium's equilibrium potential than sodium's.

In “Permeability at Rest,” find the paragraph immediately below that heading. Read the channel comparison, then inspect Figure 4.2. In “Potassium Can Cross Membrane at Rest,” read the potassium account and look at the adjacent animation if available. Continue into “Resting Membrane Potential Value”: start with the paragraph beginning “If the only structural element involved” and read through the comparison of potassium with sodium and chloride. Stop before “Maintenance of Gradients”; we address it next. Focus on why the number of open routes matters, rather than memorising the example permeability ratios.

A useful distinction emerges. An ion’s equilibrium potential is the voltage at which that one ion would have no net movement through its open channels. The resting membrane potential is the voltage of the whole membrane, with several ions able to cross to differing degrees. A stable resting voltage therefore does not mean every permeable ion has reached its own equilibrium.



Keeping a resting voltage: the pump’s supporting role

If potassium keeps leaking out and sodium keeps leaking in, why doesn’t the resting arrangement gradually disappear? The sodium–potassium pump maintains their concentration differences. Using energy from ATP, it moves three sodium ions out of the neuron for every two potassium ions it moves in. Unlike a leak channel, the pump can move ions against the tendencies set by their gradients.

Read the short “Maintenance of Gradients” section to connect this active transport to the passive movements you have just studied.

The Membrane at Rest – Foundations of Neuroscience

Return to “The Membrane at Rest” for the pump's role in sustaining the conditions that make selective permeability effective.

Under “Maintenance of Gradients,” begin with the question about what maintains the gradients as ions move across the membrane. Then read the pump explanation. Stop before “Calculating Membrane Potential with Goldman Equation.” Focus on the pump's continuing maintenance of the gradients, not the molecular details of one pump cycle.

It helps to separate two roles that are easy to merge. The open channels and the existing ion gradients explain much of the immediate resting voltage: potassium has the strongest influence because it has more open routes at rest. The pump is essential for sustaining the gradients over time. It also moves a net positive charge outward each cycle and can contribute directly to voltage, but its chief role in this explanation is maintaining the sodium and potassium concentration differences.

“Resting” therefore describes a stable condition, not inactivity. Ions continue to move, and the pump continues to use energy. The voltage can stay approximately steady because these ongoing processes counterbalance one another.



Putting the mechanism together

The causal explanation is now complete. The membrane separates solutions with different ion concentrations. Its open channels give some ions more opportunities to cross than others. At rest, relatively high potassium permeability lets potassium’s outward tendency establish a negative voltage, which in turn opposes further outward potassium movement. Smaller contributions from sodium and other permeant ions keep the actual resting voltage from being exactly . Active transport maintains the gradients on which those movements depend.

Keep these three statements distinct:

  • More potassium inside describes a concentration difference, not the sign of the voltage.
  • More open potassium routes describes permeability and explains potassium’s strong influence on resting voltage.
  • A negative resting voltage describes an electrical difference across the membrane, not a large loss of potassium from the cell.

That negative voltage is the starting condition for the next lesson. There, you’ll see how changes in which ion channels are open can produce and propagate an action potential.