Hello. The earlier module established that the FTSE 100 gives companies different weights according to their free-float-adjusted market values. This module asks what those weights mean when share prices move. Today you will calculate a simplified index’s percentage change from its constituent weights and share-price returns. That calculation is the key to understanding why the headline index can rise even when most of its companies fall.
Why a share-price move does not count equally for every company
Suppose one company represents 5% of an index and another represents 1%. If both shares rise by 2%, the first company has five times as much influence on the index’s movement. A headline change is therefore not the average company’s return, nor the percentage of companies whose shares rose.
The FTSE Russell calculation guide states this principle directly. It also explains the divisor: the scaling number that turns the basket’s combined market value into a manageable index level, such as a figure in the thousands.
FTSE UK Index Series Guide to Calculation
Read FTSE Russell’s explanation to connect the company weights from the earlier module with movements in the published index.
In Section 2, “Price indices” (printed p. 4 of 18), read subsection 2.1 from the weighting explanation. Then, in subsection 2.2 on the same page, read from the sentence beginning “At the starting date for calculating an index” through the divisor explanation. Focus on why a larger company’s price movement matters more, and why a change to the basket itself need not cause a jump in the index.
For the calculations in this lesson, assume the companies, their included share counts and their free-float factors stay unchanged during the period. That lets us isolate share-price movements. The divisor can then be treated as unchanged too. Actual index calculations make adjustments when circumstances change; those mechanics are not needed to calculate the simplified movement here.
The weighted-return calculation
Start with each company’s weight at the beginning of the period. For each share, calculate its price return over that same period. Multiply the weight by the return, then add the results:
Here, is company ’s starting weight, expressed as a fraction, and is its share-price return, also expressed as a fraction. The weights add to . If you write share returns as percentages instead, multiplying each one by its fractional weight gives its contribution in percentage points.
The following short passage presents the weighted-return formula alongside its definitions. For now, use share-price returns in the formula; the distinction involving income belongs to the later lesson on dividends.
Price Return vs. Total Return | CFA Level 1
Read AnalystPrep’s weighted-return explanation for a compact statement of the calculation you will use.
In “Price Return and Total Return,” find the paragraph immediately after the definitions of the index price-return and total-return terms. Read the weighted formula and the definitions immediately beneath it. Focus on what the weight and constituent return represent; you can leave the total-return application until the dividends lesson.
Consider a hypothetical three-company index. At the start of a day, the companies have included market values of £600 million, £300 million and £100 million. Their total is £1,000 million, so their starting weights are 60%, 30% and 10%.
| Company | Starting weight | Share-price return | Index contribution |
|---|---|---|---|
| A | 60% | +2% | +1.2 percentage points |
| B | 30% | −1% | −0.3 percentage points |
| C | 10% | −3% | −0.3 percentage points |
Adding the contributions gives an index price movement of +0.6%. Two of the three shares fell, yet the index rose: the rise in the largest company outweighed both declines.
You can check the answer using the basket’s market value. With included share counts unchanged, A’s value becomes £612 million, B’s £297 million and C’s £97 million. Their new total is £1,006 million, up £6 million on £1,000 million—again, +0.6%.
Why do we use starting weights? Each contribution measures the change relative to the basket’s starting value. Prices will alter the companies’ proportions by the end of the day; substituting those ending proportions into this calculation would give a different answer. Also keep the units straight: A’s +1.2 percentage-point contribution is not a +1.2% share return. Its share returned +2%; its 60% weight scaled that return down to its effect on the index.
From a percentage change to an index-point change
The index’s level and its percentage movement are related, but they are not interchangeable. If the hypothetical index began at 8,000 points, its +0.6% movement would be:
It would finish at 8,048 points. The same percentage change would produce a different number of points if the starting level were different. Thus, when reading a headline, check whether a figure describes points or a percentage.
FTSE Russell’s own simplified example provides a useful check on the method. It holds included share counts constant across two dates, calculates each company’s market value, and then calculates the index level.
FTSE UK Index Series Guide to Calculation
Return to FTSE Russell’s guide to see how the weighted movement appears in an index-level calculation.
In Section 2, subsection 2.3.1, “Example one” (printed pp. 5–6 of 18), follow Steps one through five, beginning at the two-date example. Note each company’s starting and ending market values, the unchanged divisor, and the rounded index levels at the end. You do not need the preceding stock-split example or the subsequent examples involving capital changes.
In that example, A’s included market value rises from £165,896.10 million to £173,883.69 million. B’s and C’s values fall. Measured against the basket’s starting total of £391,835.77 million, their approximate contributions are +2.04, −0.98 and −0.54 percentage points. The combined movement is about +0.52%. The guide displays the index going from 100.0 to 100.5; its displayed index levels are rounded, so calculating from those two displayed figures alone will not reproduce the more precise percentage exactly.
This example also shows why you normally do not need to calculate the divisor to find a simplified percentage movement. With the divisor unchanged, it scales both the starting and ending basket values in the same way. You can calculate the percentage change either from the basket’s market values or from its starting weights and constituent share-price returns.
What to take into the next headline
To calculate a simplified index movement, use starting weights, multiply each by the share’s price return over the same period, and add the contributions. A contribution is measured in percentage points; the total is the index’s percentage price movement. Company counts alone cannot tell you its direction.
Next, you will apply the same attention to weights at a broader level: identifying which industries occupy the largest portions of the FTSE 100, rather than judging its exposure by how many companies each industry contains.