Skip to main content

Welcome to a Grasp lesson

Create a free account to keep studying and create your own study path.

Lesson 1

Selecting Safety Precautions for Science Experiments

Recommended resources

Welcome. This course begins with practical safety because the same habit supports every investigation that follows: notice what could cause harm, then choose an action that reduces the chance of harm. This module will also cover unit conversions, calculations and graphs. Today’s focus is narrower and immediately useful: given a hazard in a school experiment, choose a precaution that addresses it and explain why. Allow about 40 minutes for the lesson and its resources.


Start with the difference between a hazard and a risk

A hazard is something that could cause harm, such as a flame, corrosive liquid, hot glass or damaged electrical wire. Risk concerns the chance of harm under the conditions of a particular experiment. A flame remains a hazard whether or not anyone stands near it; tying back hair reduces the risk of hair catching fire.

The interactive lab primer - working safely | Resource | RSC Education

Read the Royal Society of Chemistry’s explanation of hazard, risk and risk assessment. It gives you a way to reason from a stated danger to a useful precaution.

Under “Laboratory rules and chemical safety,” find “General principles.” Read the three definitions, stopping before “Basic laboratory best practice.” Notice that a precaution changes the conditions of use; it does not necessarily make the hazard disappear.

For example, moving a bottle of acid away from the edge of a bench does not change the acid. It makes a spill less likely. Wearing goggles adds protection if a splash still occurs. These precautions address different parts of the same risk, so they can be used together.

In school practical work, follow the teacher’s instructions before handling a material or changing a procedure. If you do not know what a substance or piece of equipment is, ask rather than guessing that it is safe.



Read the warning, then identify the possible harm

Labels can alert you to hazards before an experiment starts. The picture is a prompt to ask, “What could happen here?” It is not, by itself, a complete set of handling instructions.

Eight illustrated warnings: explosive, environmental hazard, corrosive, gas under pressure, flammable, harmful or irritating substance, acute toxicity, and electrical danger. The yellow electrical triangle is a general warning sign, not a red-diamond chemical hazard pictogram.

The red-diamond exclamation mark can warn of harmful or irritating effects; it does not mean every substance bearing it has the same effect. The skull and crossbones signals acute toxicity, which calls for particular care to prevent exposure. The environmental symbol points to possible harm outside the experiment, so disposal matters too. Always check the specific label and instructions rather than choosing a precaution from the picture alone.

Working safely in the lab - Working scientifically - KS3 Science - BBC Bitesize

Read BBC Bitesize’s school-lab guidance to connect warning symbols and everyday lab situations with precautions.

In “Hazard symbols,” look at the illustrated symbols and read the explanation beside them. Then, under “Top 10 laboratory safety rules,” start with “Dress for practical work” and read the practical rules through “Know what to do in case of accidents.” Finally, under “Precautions,” read the hazard table. For each row, notice how the stated action reduces the risk.

Some precautions apply almost everywhere: keep bags out of walkways, do not eat or drink, do not taste or directly sniff chemicals, and report accidents promptly. Others depend on the hazard. Goggles help protect eyes from a splash, but they do not prevent a flammable liquid from igniting. A good safety choice is specific to the way harm could occur.



Choose a control that interrupts the harm

A useful way to decide is to consider how the hazard could reach someone. A splash could reach the eyes; vapour could be breathed in; loose hair could enter a flame. First reduce the opportunity for that contact, then use the protective equipment required for the task.

Minimizing Risks in the Chemistry Laboratory | ACS College Safety Video #4

Watch “Minimizing Risks in the Chemistry Laboratory” from the American Chemical Society for its explanation of exposure and why protective equipment is only one layer of safety. It is set in a college laboratory; in school, your teacher specifies the procedure and equipment.

Watch exposure routes for the ways chemicals can enter or contact the body. Then watch risk controls for the idea of removing, reducing or substituting a hazard where possible. Finish with eye protection to see why goggles are a final barrier against splashes, not a replacement for careful handling.

Consider a corrosive liquid. Keeping its container stable and away from the bench edge reduces the chance of a spill; wearing the specified goggles reduces the chance of an eye injury if a splash occurs. Similarly, for a flammable liquid, removing an ignition source addresses the fire risk more directly than wearing gloves would.

The Royal Society of Chemistry gives further examples for these chemical hazards:

The interactive lab primer - working safely | Resource | RSC Education

Return to the Royal Society of Chemistry primer for the reasons behind precautions for flammable, irritating and corrosive substances. Some examples concern specialist chemicals: concentrate on the safety principles, not their names.

Under “Handling chemicals safely,” find “Flammable chemicals” and read the flame and heating guidance. Under “Irritant chemicals,” read the short explanation of irritating vapours. Under “Corrosive chemicals,” read the handling advice. In a school lab, do not select special heating or ventilation equipment yourself; follow the teacher’s procedure.

The following examples show what a matched precaution looks like:

Stated hazard Suitable precaution and reason
Liquid may splash into eyes Wear the specified safety goggles to protect eyes; handle the container carefully to reduce splashing.
Flammable liquid near a flame Keep it away from naked flames; use only the heating method specified by the teacher.
Vapour may irritate or harm the lungs Do not sniff it; use the teacher-specified ventilation or fume cupboard so vapour is not breathed in.
Hot glass or hot liquid Leave it to cool and use suitable holders or tongs as instructed, avoiding burns.
Broken glass Keep clear and tell the teacher; do not pick it up with bare hands or put it in ordinary waste.
Damaged wire or liquid near electrical equipment Do not use the equipment; keep liquids away and report the problem before power is applied.
Substance harmful to the environment Follow the teacher’s disposal instructions; do not pour it down a drain unless instructed.

A gas-under-pressure or explosive warning needs particular care: do not handle or heat the item on your own initiative. Stop and ask for instructions. “Be careful” is not a strong precaution because it does not say what action prevents the stated harm.



Put the reasoning into a school-lab answer

Suppose a class is heating a salt solution and the liquid begins to spit. The hazard is hot liquid that could splash. The precaution is to wear goggles and follow the instruction to stop heating when it spits. The reason is that these actions protect the eyes and reduce further splashing. The hot apparatus is a second hazard, so it should be left to cool before it is touched.

Now change one detail: the liquid to be heated is flammable. Goggles still protect against splashes, but they do not solve the fire hazard. The more relevant precaution is to keep the liquid away from a Bunsen flame and use only the alternative method specified by the teacher. This illustrates why you must read the stated hazard, not supply the same safety rule for every experiment.

A concise answer can use this pattern: “Because [hazard] could [cause harm], [specific action] reduces the risk by [how it prevents or limits that harm].” You need not name every possible precaution. Choose one that clearly matches the danger described.

If a spill, breakage or injury occurs, tell the teacher immediately. Do not try to clean up an unknown chemical or broken glass without direction; doing so could create another exposure.



Key takeaways

A hazard is a possible source of harm; risk depends on the conditions of the experiment. To choose a precaution, identify what could happen, then select an action that blocks or reduces that particular possibility. Symbols help you spot dangers, but the label and teacher’s instructions determine what to do. Protective equipment is valuable, yet it works best alongside precautions that prevent exposure in the first place.

The next lesson turns to converting units of length, mass and volume—another practical skill that will make later measurements and calculations more reliable.